Search Results: BAE Systems

Cee-Bee® A-653 is a chrome-free, light-to-medium duty deoxidizer that will deoxidize, desmut, and etch aluminum and aluminum alloys prior to dye penetrant inspection, anodizing, resistance welding, and conversion coatings.

Cee-Bee® A-643 FF is a chrome-free, fluoride-free light duty deoxidizer that will deoxidize and desmut aluminum and aluminum alloys prior to anodizing, conversion coatings, dye penetrant inspection, and resistance welding.

Eldorado ALK-660 is a biodegradable, water ­dilutable, environmentally safe cleaning compound used to remove oil, exhaust tract film, and traffic film from aircraft exteriors. It may also be used for cleaning cabin and baggage areas of aircraft interi­ors, as well as gas trucks, ground service units, and freight-handling equipment. It is also intended to be used to clean surfac...

Eldorado ALK-600 is an alkaline, water-based, concentrated cleaner, used to remove oil, exhaust tract film, and traffic film from aircraft exteriors. It may also be used for cleaning cabin and baggage areas of aircraft interiors, as well as fuel trucks, ground service units, and freight-handling vehicles. It is intended to be used to clean surfaces prior to recoating with seala...

Astrosol Orange is a powerful, terpene-based degreaser/cleaner. It is designed for light to heavy duty removal of greases, oils, hydraulic fluid, and carbon (exhaust tracks) from aircraft surfaces, and other large structures. There are no refined petroleum solvents in Astrosol Orange. The surfactants and solvents contained in Astrosol Orange are known to readily  biodegrade in

Eldorado AC-182 is designed for use to prepare steel and aluminum surfaces for painting, to descale systems that may be harmed by muriatic acid, and to remove rust from steel under conditions where fumes from muriatic acid would be harmful to the surroundings.

Eldorado ED-333 is a water soluble, nonionic, surfactant designed for light to medium duty, wetting and cleaning of non-porous, hard-surfaces and oil emulsification. Typical uses include cleaning of glass and plastic windows, oily surfaces, oxygen systems, and oily parts in ultrasonic or soak tanks. ED-333 must be diluted prior to use.

Eldorado ED-563 is a liquid, water miscible, solvent material for maintenance cleaning of jet and tur­bine engines. ED-563 improves engine perform­ance by removing carbon and controls corrosion by the removal of salt buildup and sulfate residues.

Eldorado Calibration Fluid 77 is a special aliphatic solvent blend intended for use in calibration of aircraft fuel system components for reciprocating and turbine engines. It may also be used separately for cleanup of grease or preservative coated surfaces.

Eldorado Dorado Kote #4 is a ready-to-use liquid that produces a thin, golden colored, chromate conversion coating when applied to prepared aluminum surfaces. The coating provides excellent corrosion resistance for unpainted aluminum and enhances the adhesion of applied paint systems.

Eldorado SR-125A is a clear viscous, sealant re-mover, designed for removal of polysulfide sealants and polysulfide primer/polyurethane topcoat paint systems. SR-125A has a low vapor pressure, and therefore, evaporates slowly to maximize active dwell time on sealant.

Eldorado PR-5044 a viscous, peroxide-activated, benzyl alcohol paint and primer remover designed for removal of durable polyurethane and epoxy paint systems.

Eldorado PR-3133 is a light blue-colored, viscous, ammonia-activated, benzyl alcohol emulsion type paint remover, designed for general purpose removal of enamel, lacquer, polysulfide primer, epoxy and polyurethane from metal surfaces. PR-3133 is unique in the industry in its ability to remove both polysulfide primed and epoxy primed polyurethane coating systems.

Eldorado PR-2002 is a nonevaportive, acid-activated paint and primer remover, for removal of polyurethane and epoxy paint systems. PR-2002 is designed for use on resistant films, which cannot be removed with neutral or alkaline strippers.

Cee-Bee® E-2013T is an environmentally friendly hot tank-type remover for polyurethane and other paint systems.

The Cee-Bee® Cleaning Machine has emerged as the premier remedial cleaning tool that can restore vacuum system lavatory waste lines to like new, pristine condition. The Cee-Bee® Cleaning Machine is available in air driven, pneumatic, and electric versions. The Cee-Bee® Cleaning Machine utilizes Honey Bee™ 60TNP, the top-performing waste line descaling product. Honey Bee™ 60TNP

Honey Bee™ 20C is a highly concentrated, quaternary amine base, liquid deodorant/bacteriacide for use in chemical and portable toilets, cargo areas and refuse storage tanks.

Honey Bee™ 60NP is an acidic liquid cleaner developed for removal of hard water scale and accumulated waste materials from toilet systems in aircraft.

Honey Bee™ 26 is a highly concentrated quaternary amine based liquid deodorant/bactericide for use in aircraft toilets, cargo areas and refuse storage tanks.

Cee-Bee® J-91 is a diphase, highly active, cold paint, dry film lubricant, and resistant coatings remover.

Honey Bee™ 60 is an aircraft lavatory cleaner for removing water scale and stains from stainless steel. It is a thixotropic, acidic, liquid cleaner designed to remove hard water scale from vacuum and recirculating toilet systems.

Honey Bee™ 60T is an acidic liquid cleaner developed for removal of hard water scale and accumulated waste materials from vacuum and re-circulating toilet systems in aircraft.

Honey Bee™ 60 TNP is an acidic liquid cleaner developed for removal of hard water scale and accumulated waste materials from vacuum toilet systems in aircraft.

Honey Bee™ 76 is a concentrated aircraft toilet cleaner specifically designed for removing gummy deposits that form in aircraft lavatory systems.

Honey Bee™ Deodorant 24 is a powerful aircraft lavatory deodorant. It is a concentrated, liquid deodorant for use in aircraft toilets, cargo areas, and refuse storage tanks.

Cee-Bee® A-477 is a non-methylene chloride, alkaline, diphase, hot tank paint and carbon remover.

Cee-Bee® A-458 is specifically designed for removing polysulfide basecoat paint systems. Also used for stripping polysulfide sealants and similar sealing compounds.

Cee-Bee® E-1058 is a non-toxic, thixotropic stripper specifically designed for removing polysulfide basecoat paint systems, polysulfide sealants and similar adhesives.

Cee-Bee® E-1004J is a non-toxic, acid activated aircraft paint remover designed for removing polyurethane and other paint systems.

Cee-Bee® E-1092T is an environmentally-friendly, cold tank-type remover for polyurethane and other paint systems, including powder coat. Softens paint to make subsequent media blasting easier.

Cee-Bee® E-2002A is a non-toxic paint stripper designed for removing polyurethane and other paint systems.

Cee-Bee® E-2012A is an environmentally friendly paint stripper designed for removing paint from selectively strippable coating systems such as those used on composite aircrafts. Excellent for removing topcoats.

Cee-Bee® E-2787 is an environmentally friendly paint stripper designed to remove topcoat of selectively strippable systems.

Cee-Bee® E-3000M is a non-toxic, environmentally friendly hydrogen peroxide-activated paint stripper designed for removing polyurethane, epoxy and other paint systems.

Cee-Bee® A-882 (20%) is a ready-to-use general purpose cleaner for aircraft exterior surfaces.

Cee-Bee® A-882 is a water-dilutable general-purpose cleaner for aircraft exterior surfaces.

Cee-Bee® A-601L is a liquid chromated, medium-to-heavy duty deoxidizer that will deoxidize, desmut, and etch aluminum and aluminum alloys prior to dye penetrant inspection, anodizing, resistance welding, and conversion coating.

Cee-Bee® A-663 is a chrome-free, medium-to-heavy duty deoxidizer that will deoxidize, desmut, and etch aluminum and aluminum alloys prior to dye penetrant inspection, anodizing, resistance welding, and conversion coating.

Cee-Bee® E-3102 is a non-toxic, alkaline mold release agent remover designed for dissolving build-up of silicone-based mold release agents and epoxy fiber resin from composite tooling.

Super Bee™ 300LF is a low foaming aqueous alkaline cleaner for immersion, spray wash, spray/rinse, steam injection, ultrasonic and pre/post NDT Cleaning Applications.

Super Bee™ 400TG is a liquid concentrate formulated to remove greases, oils, and particulate soil from aluminum alloys, other non-ferrous metals, and steel. Super Bee™ 400TG provides long bath life and high level of soil loading.

Super Bee™ 212 Gel is a non-solvent, highly concentrated gel specifically designed for cleaning aircraft exterior surfaces.

Cee-Bee® F-19 is a neutral, non-flammable, bubble fluid for detecting leaks in high and low pressure oxygen, and other gas, systems.

Cee-Bee® E-2060 is a non-toxic, hydrogen peroxide-activated paint stripper designed for removing polyurethane, epoxy and other paint systems.

Cee-Bee® E-3000 is an environmentally friendly hydrogen peroxide-activated paint stripper designed for removing polyurethane, epoxy and other paint systems.