DISPLAYING:
Refine By:
Cee-Bee® Aerosolv is a cleaning and degreasing solvent designed to remove grease, oil, and shop soils from painted, unpainted, and most composite surfaces.
Honey Bee™ Aerogel “Sparkle” Air Freshener is an elastomeric rubber gel that provides a consistent, long-lasting fragrance in aircraft lavatories, cabins and galleys. Unlike the traditional polyester disc which allows free evaporation of fragrance oils, Aerogel encapsulates a higher level of fragrance and controls the release to deliver a consistent, pleasant fragrance.
Cee-Bee® Aerofresh 35 Lavatory Deodorant is a new-generation formula that utilizes odor-elimination technology. Aerofresh 35 is a cost-effective, concentrated liquid that keeps waste holding tanks and lavatory components clean.
Super Bee™ 262 Gel is a non-solvent, highly-concentrated gel specifically designed for degreasing turbine engines prior to tear down and for exterior aircraft cleaning.
Cee-Bee® R-681 Aerosol is a ready-to-use, mildly alkaline, aerosol product used for cleaning painted and unpainted aircraft surfaces. This product was developed in cooperation with NAVAIR.
Cee-Bee® A-292NC is a chrome-free, viscous paint stripper that rapidly and effectively strips a wide variety of coatings.
Astromat Orange is a viscous, non-petroleum, solvent-based cleaner, to be used on painted and unpainted surfaces. Astromat Orange is designed for routine cleaning or degreasing of reciprocating-type engines prior to maintenance/repair, and for large structures or difficult-to-reach areas on aircraft, such as wheel wells and flaps, where the increased contact time may be substit...
Eldorado GD-500 is an alkaline, water-base, liquid concentrated cleaner, used for cleanup of oil, seal-ant, and de-sealant residues from integral aircraft fuel tanks after chemical removal process. It may also be used to remove oil, exhaust track film, and traffic film from aircraft exteriors, as well as routine cleaning of gas trucks, ground service units, and freight-handling...
Eldorado ED-500 is an alkaline, water-based, liquid, concentrated cleaner, used to remove oil, exhaust track film, and traffic film from aircraft exteriors. It may also be used for cleaning cabin and baggage areas of aircraft interiors, as well as gas trucks, ground service units, and freight-handling vehicles.
ALK-774 is a biodegradable, water-dilutable, environmentally safe cleaning compound, primarily used for light to heavy duty removal of oil, grease, hydraulic fluid, and exhaust tract film from aircraft exteriors. It may be used for general purpose cleaning of cabin and baggage areas of aircraft interiors, as well as gas trucks, ground service units, and freight-handling equipment...
Eldorado ALK-660 is a biodegradable, water dilutable, environmentally safe cleaning compound used to remove oil, exhaust tract film, and traffic film from aircraft exteriors. It may also be used for cleaning cabin and baggage areas of aircraft interiors, as well as gas trucks, ground service units, and freight-handling equipment. It is also intended to be used to clean surfac...
Eldorado ALK-600 is an alkaline, water-based, concentrated cleaner, used to remove oil, exhaust tract film, and traffic film from aircraft exteriors. It may also be used for cleaning cabin and baggage areas of aircraft interiors, as well as fuel trucks, ground service units, and freight-handling vehicles. It is intended to be used to clean surfaces prior to recoating with seala...
Eldorado ED-410 is a liquid, concentrated cleaner, used to remove oil, exhaust tract film, and traffic film from aircraft exteriors. It may also be used for cleaning cabin and baggage areas of aircraft interiors, as well as gas trucks, ground service units, and freight-handling vehicles.
Astrosol 37 is a viscous, water-based, gel-type cleaner. Used to remove oil, hydraulic fluid, exhaust tract film, and traffic film from aircraft exteriors, aerospace ground equipment (AGE), and AGE engines. Typical areas of use include, wheel wells, wing butts, flaps, and other hard to reach areas that can tolerate water rinsing. Astrosol 37, containing no ethoxylated alkyl phe...
Astromat Orange DF (Astro ODF) is a viscous, non-petroleum, solvent-based cleaner to be used on painted and unpainted surfaces. Astromat Orange DF (Astro ODF) is designed for use as received for routine cleaning or degreasing of reciprocating-type engines prior to maintain/repair, and for large structures or difficult-to-reach areas on aircraft, such as wheel wells and flaps,
Eldorado AC-111 is a liquid, organic acid based cleaner, used for descaling of hot section jet engine parts and calcium deposit removal. AC-111 leaves no residue when it burns off; therefore, no corrosion due to molten salt may occur in the combustion section of turbine engines. AC-111 is formulated as a metal safe replacement for acid sulfate descaler solutions.
Eldorado ED-317 is a concentrated, general purpose, liquid detergent.
Eldorado ED-563 is a liquid, water miscible, solvent material for maintenance cleaning of jet and turbine engines. ED-563 improves engine performance by removing carbon and controls corrosion by the removal of salt buildup and sulfate residues.
Eldorado Calibration Fluid 77 is a special aliphatic solvent blend intended for use in calibration of aircraft fuel system components for reciprocating and turbine engines. It may also be used separately for cleanup of grease or preservative coated surfaces.
Eldorado HTP-1150L is a liquid, water-dilutable, hot-tank cleaner and rust and paint remover, for use on steel and ferrous alloy parts.
Eldorado CT-2500 is a tank-type, two-phase, solvent-based cleaner, paint stripper, and carbon remover.
Eldorado CT-2400 is a two-phase, cold-solvent, tank-type chlorinated carbon remover and paint stripper. It is particularly recommended for use on engine parts to remove baked-on soils, especially on reciprocating engines.
Cee-Bee® Anti-Foam Additive is a fast-acting, non-silicone, organic antifoaming agent that can be used to de-foam various cleaning solutions in agitated immersion and high-pressure spray wash applications.
Cee-Bee® MX-15U is a product used to inhibit oxidation of steel, aluminum, magnesium and other metals. Cee-Bee® MX-15U is available as a powder or as a liquid concentrate.
Cee-Bee® Additive GO-2L is used to maintain the sequesterant concentration in Cee-Bee® J-84A, J-84AL and J-86C-6 solutions.
Cee-Bee® J-88 Additive PL is an additive used to make up for drag-out losses and active ingredients consumed during the cleaning process.
Cee-Bee® J-91 Additive O is an additive designed to maintain the oil seal level on Cee-Bee® J-91.
Cee-Bee® A-292NC-M is an extremely versatile aircraft paint remover. This thickened paint stripper rapidly and safely strips alkyd and modified alkyd enamels, nitrocellulose and acrylic lacquers, most moisture cured polyurethanes and many air-dried epoxy coatings. Application is either by Spray or Brushing on the surface.
Cee-Bee® EPC 1 is a concentrated neutral water-based detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine engine compressors.
Cee-Bee® A-215 Additive S is used to maintain solvent in Cee-Bee® A-215 baths.
Cee-Bee® A-477 Additive O is used to maintain the oil seal level. Hot Tank Paint & Carbon Remover that effectively removes carbonaceous deposits. Safe on most aircraft structural metals, including high strength steel.
Cee-Bee® A-477 Additive A is used to maintain the alkalinity level. Hot Tank Paint & Carbon Remover that effectively removes carbonaceous deposits. Safe on most aircraft structural metals including high strength steel.
Cee-Bee® J-88 Additive P is an additive used to make up for drag-out losses and active ingredients consumed during the cleaning process.
Cee-Bee® A-7X7S is an aqueous alkaline cleaner used for immersion, ultrasonic, spray/rinse, steam injection and pre/post NDT cleaning applications. Cee-Bee® A-7X7S is also approved for turbine engine degreasing prior to teardown.
Cee-Bee® J-89 is a highly alkaline powder used for conditioning heat scale on titanium alloys prior to pickling.
Cee-Bee® Nortex 3025 is a water-based liquid that provides short-term temporary corrosion inhibition for ferrous metals.
Cee-Bee® WDO is a high-flash water-displacing oil designed to provide anti-rust protection.
Cee-Bee® P-109B is a powdered material to be added to nitric acid solutions for removal of oxides and baked-on graphite from titanium and nickel alloys.
Cee-Bee® J-84AL is a concentrated, highly-alkaline liquid cleaner used for removing rust, high-temperature oxides, carbon, dry film lubricant and aluminized paints from hot section turbine engine components. Cee-Bee® J-84AL is typically used in multi-step cleaning processes in conjunction with Super Bee™ 300LF/G or Cee-Bee® A-7X7 aqueous degreasers, Cee-Bee® J-88L alkaline perm...
Cee-Bee® J-91 is a diphase, highly active, cold paint, dry film lubricant, and resistant coatings remover.
Cee-Bee® A-7X7 is an aqueous alkaline cleaner used for immersion, ultrasonic, spray/rinse, steam injection and pre/post NDT cleaning applications. Cee-Bee® A-7X7 is also approved for turbine engine degreasing prior to teardown.
Cee-Bee® C-46 is a heavy duty, hot tank cleaner specifically designed for cleaning engine parts and radiators during overhaul.
Cee-Bee® J-2 is a mildly acidic liquid scale remover for corrosion resistant steels and nickel and cobalt-based alloys. Cee-Bee® J-2 is typically used in various combinations with Super Bee™ 300LF/G, Cee-Bee® J-84AL and Cee-Bee® J-88L.
Cee-Bee® C-623 is an inhibited phosphoric acid cleaner and descaler that is used in a multi-step cleaning process with Cee-Bee® J-84AL, J-88L and J-3.
Honey Bee™ Deodorant 24 is a powerful aircraft lavatory deodorant. It is a concentrated, liquid deodorant for use in aircraft toilets, cargo areas, and refuse storage tanks.
Cee-Bee® J-84A is a highly alkaline powder used for removing rust, high-temperature oxides, carbon, dry film lubricant and aluminized paints from hot section turbine engine components. Cee-Bee® J-84A is typically used in multi-step cleaning processes in conjunction with Super Bee™ 300LF/G or Cee-Bee® A-7X7 aqueous degreasers, Cee-Bee® J-88L alkaline permanganate and Cee-Bee® J-...
Cee-Bee® J-88 is a powdered alkaline permanganate scale conditioner used in various multi-step turbine engine cleaning processes. Cee-Bee® J-88 is typically used in conjunction with Super Bee™ 300LF/G, Cee-Bee® J-84AL, Cee-Bee® J-3 and Cee-Bee® 623.
Honey Bee™ Freshener 50 is an aqueous solution of detergents and perfume designed for in-flight treatment of aircraft toilets.
Cee-Bee® J-3 is a mildly acidic liquid scale remover for use in hot section, multi-step turbine engine overhaul cleaning processes. Cee-Bee® J-3 is normally used together with Super Bee™ 300LF/G or Cee-Bee® A-7X7, Cee-Bee® J-84AL, Cee-Bee® J-88L and Cee-Bee® C-623 as part of various multi-step overhaul cleaning processes.
Honey Bee™ 60 is an aircraft lavatory cleaner for removing water scale and stains from stainless steel. It is a thixotropic, acidic, liquid cleaner designed to remove hard water scale from vacuum and recirculating toilet systems.
Cee-Bee® J-88L is a liquid alkaline permanganate scale conditioner used in various multi-step turbine engine cleaning processes. Cee-Bee® J-88L is typically used in conjunction with Super Bee™ 300LF/G, Cee-Bee® J-84AL, Cee-Bee® J-3 and Cee-Bee® C-623.
Honey Bee™ 60T is an acidic liquid cleaner developed for removal of hard water scale and accumulated waste materials from vacuum and re-circulating toilet systems in aircraft.
Cee-Bee® A-480 is a water-based, heated, immersion solvent cleaner specifically designed to remove carbon and other tenacious soils from turbine engine components. Cee-Bee® A-480 can be used as an alternative or subsequent cleaning process to light-duty aqueous degreasing when used as directed.
Honey Bee™ 60 TNP is an acidic liquid cleaner developed for removal of hard water scale and accumulated waste materials from vacuum toilet systems in aircraft.
Honey Bee™ Freshener Soak 50C is an aqueous solution of detergents and perfume designed for deodorizing aircraft toilets in place, toilet parts prior to service work, and interior & cargo areas.
Cee-Bee® E-1058 is a non-toxic, thixotropic stripper specifically designed for removing polysulfide basecoat paint systems, polysulfide sealants and similar adhesives.
Cee-Bee® C-50 is a rapidly-evaporating safety solvent to replace flammable cleaning solvents, such as methyl ethyl ketone (MEK) and toluene.
Cee-Bee® C-105HF is an acid-activated, water-thin product designed to remove silicone sealants, resins, paints, and adhesives.
Cee-Bee® C-105NC is a thin, acid-activated product for removing silicone sealants, resins, paints, and adhesives.
Cee-Bee® A-477 is a non-methylene chloride, alkaline, diphase, hot tank paint and carbon remover.
Cee-Bee® A-882 (20%) is a ready-to-use general purpose cleaner for aircraft exterior surfaces.
Cee-Bee® A-882 is a water-dilutable general-purpose cleaner for aircraft exterior surfaces.
Super Bee™ 300LFM is a low-foaming liquid concentrate for use in spray wash and immersion cleaning applications.
Cee-Bee® A-663 is a chrome-free, medium-to-heavy duty deoxidizer that will deoxidize, desmut, and etch aluminum and aluminum alloys prior to dye penetrant inspection, anodizing, resistance welding, and conversion coating.
Cee-Bee® ALKO is a viscous, alkaline, water-based heavy-duty cleaner and corrosion and carbon remover. Cee-Bee® Alko is also effective in removing coked oils from turbine engine components.
Cee-Bee® A-292 is an alkaline-activated aircraft paint remover that rapidly and effectively strips a wide variety of coatings, including alkyd and modified alkyd enamels, nitrocellulose and acrylic lacquers, most moisture cured polyurethanes and many air-dried epoxies. Safe to use on all common aircraft structural metals.
Cee-Bee® A-215 is a very effective paint and carbon remover that works without heating. It is a diphase, solvent-base, alkaline cold-tank paint and carbon remover.
Cee-Bee® E-3102 is a non-toxic, alkaline mold release agent remover designed for dissolving build-up of silicone-based mold release agents and epoxy fiber resin from composite tooling.
Cee-Bee® A-6 is a unique, colorless, transparent “soil barrier” designed to prevent traffic soils from becoming attached to clean exterior surfaces of aircraft and ground support equipment.
Super Bee™ 210 is a highly concentrated, general purpose cleaner specifically designed for cleaning aircraft exterior and interior surfaces.
Super Bee™ 300LF is a low foaming aqueous alkaline cleaner for immersion, spray wash, spray/rinse, steam injection, ultrasonic and pre/post NDT Cleaning Applications.
Super Bee™ 400TG is a liquid concentrate formulated to remove greases, oils, and particulate soil from aluminum alloys, other non-ferrous metals, and steel. Super Bee™ 400TG provides long bath life and high level of soil loading.
Super Bee™ 300LFG is a low-foaming liquid aqueous degreaser approved for immersion, spray wash, spray rinse, steam injection, ultrasonic, and pre/post NDT cleaning applications. It is safe on all common aircraft and turbine engine alloys when used as directed. Contains no nonyl-phenol ethoxylates (NPE).
Cee-Bee® B-55 is a thickened, acidic, heavy-duty oxidation remover and aluminum conditioner.
Showing 74 of 74
Contact Support Request a Quote How To Buy
We use cookies to collect information about how you use our site, monitor site performance, and improve your experience. By using our website you agree to these Terms of Use.
