Search Results: Military

Cee-Bee® R-256 NC is a viscous alkaline phenolic paint remover.

Cee-Bee® A-292NC is a chrome-free, viscous paint stripper that rapidly and effectively strips a wide variety of coatings.

Eldorado ED-500 is an alkaline, water-based, liquid, concentrated cleaner, used to remove oil, exhaust track film, and traffic film from aircraft exteriors. It may also be used for cleaning cabin and baggage areas of aircraft interiors, as well as gas trucks, ground service units, and freight-handling vehicles.

Eldorado AC-12 is a phosphoric acid based cleaner used for removing corrosion and for bright etching aluminum aircraft surfaces. AC-12 deep cleans and conditions the metallic surface leaving it corrosion free and ready for bonding, welding, painting, or protective chemical treatments.

Eldorado PR-3500 is a high-performance, solvent ­based, viscous stripper, used to strip aircraft primers, epoxy, polyurethane, and other organic coatings from metal surfaces.

Eldorado PR-3133 is a light blue-colored, viscous, ammonia-activated, benzyl alcohol emulsion type paint remover, designed for general purpose removal of enamel, lacquer, polysulfide primer, epoxy and polyurethane from metal surfaces. PR-3133 is unique in the industry in its ability to remove both polysulfide primed and epoxy primed polyurethane coating systems.

Cee-Bee® E-2013T is an environmentally friendly hot tank-type remover for polyurethane and other paint systems.

Cee-Bee® J-86C-6 is a highly alkaline, hot soak liquid for removing paint, rust and other metallic oxides.

Cee-Bee® A-292NC-M is an extremely versatile aircraft paint remover. This thickened paint stripper rapidly and safely strips alkyd and modified alkyd enamels, nitrocellulose and acrylic lacquers, most moisture cured polyurethanes and many air-dried epoxy coatings. Application is either by Spray or Brushing on the surface.

Cee-Bee® EPC 1 is a concentrated neutral water-based detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine engine compressors.

Cee-Bee® J-84AL is a concentrated, highly-alkaline liquid cleaner used for removing rust, high-temperature oxides, carbon, dry film lubricant and aluminized paints from hot section turbine engine components. Cee-Bee® J-84AL is typically used in multi-step cleaning processes in conjunction with Super Bee™ 300LF/G or Cee-Bee® A-7X7 aqueous degreasers, Cee-Bee® J-88L alkaline perm...

Cee-Bee® A-7X7 is an aqueous alkaline cleaner used for immersion, ultrasonic, spray/rinse, steam injection and pre/post NDT cleaning applications. Cee-Bee® A-7X7 is also approved for turbine engine degreasing prior to teardown.

Cee-Bee® C-623 is an inhibited phosphoric acid cleaner and descaler that is used in a multi-step cleaning process with Cee-Bee® J-84AL, J-88L and J-3.

Cee-Bee® J-88 is a powdered alkaline permanganate scale conditioner used in various multi-step turbine engine cleaning processes. Cee-Bee® J-88 is typically used in conjunction with Super Bee™ 300LF/G, Cee-Bee® J-84AL, Cee-Bee® J-3 and Cee-Bee® 623.

Cee-Bee® J-3 is a mildly acidic liquid scale remover for use in hot section, multi-step turbine engine overhaul cleaning processes. Cee-Bee® J-3 is normally used together with Super Bee™ 300LF/G or Cee-Bee® A-7X7, Cee-Bee® J-84AL, Cee-Bee® J-88L and Cee-Bee® C-623 as part of various multi-step overhaul cleaning processes.

Cee-Bee® J-88L is a liquid alkaline permanganate scale conditioner used in various multi-step turbine engine cleaning processes. Cee-Bee® J-88L is typically used in conjunction with Super Bee™ 300LF/G, Cee-Bee® J-84AL, Cee-Bee® J-3 and Cee-Bee® C-623.

Cee-Bee® A-235 is a diphase, solvent-base, alkaline, cold-tank carbon and paint remover.

Cee-Bee® E-1058 is a non-toxic, thixotropic stripper specifically designed for removing polysulfide basecoat paint systems, polysulfide sealants and similar adhesives.

Cee-Bee® E-2002A is a non-toxic paint stripper designed for removing polyurethane and other paint systems.

Cee-Bee® E-2787 is an environmentally friendly paint stripper designed to remove topcoat of selectively strippable systems.

Cee-Bee® E-3000M is a non-toxic, environmentally friendly hydrogen peroxide-activated paint stripper designed for removing polyurethane, epoxy and other paint systems.

Cee-Bee® R-256 is a high-performing aircraft paint stripper for rapid removal of primers, enamels and chemically resistant coatings such as polyurethanes and epoxies.

Cee-Bee® C-105HF is an acid-activated, water-thin product designed to remove silicone sealants, resins, paints, and adhesives.

Cee-Bee® A-491S is a non-phenolic, alkaline, diphase, hot tank paint and carbon remover.

Cee-Bee® C-105NC is a thin, acid-activated product for removing silicone sealants, resins, paints, and adhesives.

Cee-Bee® A-477 is a non-methylene chloride, alkaline, diphase, hot tank paint and carbon remover.

Cee-Bee® A-458 is specifically designed for removing polysulfide basecoat paint systems. Also used for stripping polysulfide sealants and similar sealing compounds.

Cee-Bee® A-883 is a highly-concentrated, non-solvent gel specifically designed to clean aircraft exterior surfaces.

Cee-Bee® Intex 8992 is a pleasantly-scented cleaner for windows, mirrors and stainless-steel surfaces designed for aircrafts.

Super Bee™ 300LFM is a low-foaming liquid concentrate for use in spray wash and immersion cleaning applications.

Cee-Bee® ALKO is a viscous, alkaline, water-based heavy-duty cleaner and corrosion and carbon remover. Cee-Bee® Alko is also effective in removing coked oils from turbine engine components.

Cee-Bee® A-292 is an alkaline-activated aircraft paint remover that rapidly and effectively strips a wide variety of coatings, including alkyd and modified alkyd enamels, nitrocellulose and acrylic lacquers, most moisture cured polyurethanes and many air-dried epoxies. Safe to use on all common aircraft structural metals.

Cee-Bee® A-882 (20%) is a ready-to-use general purpose cleaner for aircraft exterior surfaces.

Cee-Bee® A-882 is a water-dilutable general-purpose cleaner for aircraft exterior surfaces.

Cee-Bee® A-6 is a unique, colorless, transparent “soil barrier” designed to prevent traffic soils from becoming attached to clean exterior surfaces of aircraft and ground support equipment.

Cee-Bee® R-677 is a solvent-based cleaner for removing soils, grease, jet exhaust carbon, and hydraulic fluids from painted and unpainted aircraft surfaces.

Cee-Bee® R-681 Aerosol is a ready-to-use, mildly alkaline, aerosol product used for cleaning painted and unpainted aircraft surfaces. This product was developed in cooperation with NAVAIR.

Cee-Bee® R-681 Wipes is a ready-to-use, mildly alkaline, solvent-based cleaner in a pre-saturated wipe for cleaning of painted and unpainted aircraft surfaces. This product was developed in conjunction with NAVAIR. Wipes are 16″x17″ and conveniently packaged as 25 wipes per pouch and 12 pouches per case.

Cee-Bee® R-681 is a water-dilutable, mildly alkaline, solvent-based product used for cleaning painted and unpainted aircraft surfaces.

Cee-Bee® F-19 is a neutral, non-flammable, bubble fluid for detecting leaks in high and low pressure oxygen, and other gas, systems.

Cee-Bee® E-2060 is a non-toxic, hydrogen peroxide-activated paint stripper designed for removing polyurethane, epoxy and other paint systems.

Cee-Bee® R-66C is a thickened, acidic, oxidation and corrosion remover, prepaint conditioner and brightener for aluminum.

Cee-Bee® A-276LV is a viscous, low VOC alkaline liquid used for removing temporary protective coatings from painted surfaces, bare metal and plastics.