Search Results: Rolls-Royce

Cee-Bee® EPC 1 is a concentrated neutral water-based detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine engine compressors.

Met-L-Chek® R-503 is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal and pre-inspection surface cleaning, R-503 is a moderate dry rate material used in general metalworking, welding, nuclear, aerospace applications. Met-L-Chek® R-503 is ideal for penetrant test panel storage and cleaning star burst cracks on TAM panels.

Met-L-Chek® R-504 is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal and verification of indications, R-504 is a flash dry rate material used in general metalworking, welding, nuclear, aerospace applications. Met-L-Chek® R-504 is ideal for penetrant test panel storage and cleaning star burst cracks on TAM panels.

Met-L-Chek® FBP-911 is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 1 water washable inspection penetrant. FBP-911 is approved for low sensitivity aerospace applications. Met-L-Chek® FBP-911 is a special oil and solvent free formulation which utilizes biodegradable components and is VOC free.

Met-L-Chek® FBP-912 is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 2 water washable inspection penetrant. FBP-912 is approved for medium sensitivity aerospace applications. Met-L-Chek® FBP-912 is a special oil and solvent free formulation which utilizes biodegradable components and is VOC free.

Met-L-Chek® FBP-913 is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 3 water washable inspection penetrant. FBP-913 is approved for high sensitivity aerospace applications. Met-L-Chek® FBP-913 is a special oil and solvent free formulation which utilizes biodegradable components and is VOC free.

Met-L-Chek® D-70 is a non-aqueous developer used in inspection Methods A, B, C, & D. Used with fluorescent penetrants as form “d” and with visible penetrants as form “e”, D-70 is available in aerosol and liquid forms. It is applied after the surface penetrant has been removed and the inspection surface dried.

Met-L-Chek® FP-95A(M) is approved to AMS-2644 as a fluorescent (Type 1); Methods “B”, “C”, and “D”; sensitivity Level 3 post emulsifiable inspection penetrant. FP-95A(M) meets requirements for high sensitivity aerospace applications.

Met-L-Chek® D-72A is a form “a” dry powder developer used with fluorescent penetrants per AMS-2644 and ASTM E-1417. D-72A consists of light fluffy absorbent, low toxicity powders.

Met-L-Chek® FP-97A(M) is approved to AMS-2644 as a fluorescent (Type 1); Methods “B”, “C”, and “D”; sensitivity Level 4 post emulsifiable inspection penetrant. FP-97A(M) meets requirements for high sensitivity aerospace applications.

Met-L-Chek® D-76B is water soluble form “b” developer used with fluorescent (Type 1), Method B & D penetrants per AMS-2644 and ASTM E-1417.

Met-L-Chek® D-78B is a water-soluble form “c” developer used with fluorescent (Type 1), and visible (Type 2) penetrants per AMS-2644 and ASTM E-1417.

Met-L-Chek® E-58D is a Method D (hydrophilic) inspection penetrant emulsifier approved to AMS-2644 for use with Met-L-Chek® FP-93A(M), FP-95A(M), and FP-97A(M) fluorescent (Type 1) post emulsifiable penetrants.

Met-L-Chek® E-59A is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal and pre-inspection surface cleaning, E-59A is a moderate dry rate material used in general metalworking, welding, nuclear, aerospace and automotive applications.

Met-L-Chek® FBP-914 is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 4 water washable inspection penetrant. FBP-914 is approved for ultra-high sensitivity aerospace applications. Met-L-Chek® FBP-914 is a special oil and solvent free formulation which utilizes biodegradable components and is VOC free.

Met-L-Chek® FP-921 is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 1 water washable inspection penetrant. FP-921 is approved for low sensitivity aerospace applications.

Met-L-Chek® FP-922 is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 2 water washable inspection penetrant. FP-922 is approved for medium sensitivity aerospace applications.

Met-L-Chek® FP-923 is approved to AMS-2644 as a fluorescent (Type 1); Methods “A” and “C”; sensitivity Level 3 water washable inspection penetrant. FP-923 is approved for high sensitivity aerospace applications.

Met-L-Chek® FP-93A(M) is approved to AMS-2644 as a fluorescent (Type 1); Methods “B”, “C”, and “D”; sensitivity Level 2 post emulsifiable inspection penetrant. FP-93A(M) meets requirements for medium sensitivity aerospace applications.

Cee-Bee® J-84AL is a concentrated, highly-alkaline liquid cleaner used for removing rust, high-temperature oxides, carbon, dry film lubricant and aluminized paints from hot section turbine engine components. Cee-Bee® J-84AL is typically used in multi-step cleaning processes in conjunction with Super Bee™ 300LF/G or Cee-Bee® A-7X7 aqueous degreasers, Cee-Bee® J-88L alkaline perm...

Cee-Bee® J-91 is a diphase, highly active, cold paint, dry film lubricant, and resistant coatings remover.

Cee-Bee® J-89 is a highly alkaline powder used for conditioning heat scale on titanium alloys prior to pickling.

Cee-Bee® WDO is a high-flash water-displacing oil designed to provide anti-rust protection.

Cee-Bee® C-46 is a heavy duty, hot tank cleaner specifically designed for cleaning engine parts and radiators during overhaul.

Cee-Bee® J-2 is a mildly acidic liquid scale remover for corrosion resistant steels and nickel and cobalt-based alloys. Cee-Bee® J-2 is typically used in various combinations with Super Bee™ 300LF/G, Cee-Bee® J-84AL and Cee-Bee® J-88L.

Cee-Bee® J-84A is a highly alkaline powder used for removing rust, high-temperature oxides, carbon, dry film lubricant and aluminized paints from hot section turbine engine components. Cee-Bee® J-84A is typically used in multi-step cleaning processes in conjunction with Super Bee™ 300LF/G or Cee-Bee® A-7X7 aqueous degreasers, Cee-Bee® J-88L alkaline permanganate and Cee-Bee® J-...

Cee-Bee® J-88 is a powdered alkaline permanganate scale conditioner used in various multi-step turbine engine cleaning processes. Cee-Bee® J-88 is typically used in conjunction with Super Bee™ 300LF/G, Cee-Bee® J-84AL, Cee-Bee® J-3 and Cee-Bee® 623.

Cee-Bee® J-3 is a mildly acidic liquid scale remover for use in hot section, multi-step turbine engine overhaul cleaning processes. Cee-Bee® J-3 is normally used together with Super Bee™ 300LF/G or Cee-Bee® A-7X7, Cee-Bee® J-84AL, Cee-Bee® J-88L and Cee-Bee® C-623 as part of various multi-step overhaul cleaning processes.

Cee-Bee® J-88L is a liquid alkaline permanganate scale conditioner used in various multi-step turbine engine cleaning processes. Cee-Bee® J-88L is typically used in conjunction with Super Bee™ 300LF/G, Cee-Bee® J-84AL, Cee-Bee® J-3 and Cee-Bee® C-623.

Cee-Bee® A-7X7 is an aqueous alkaline cleaner used for immersion, ultrasonic, spray/rinse, steam injection and pre/post NDT cleaning applications. Cee-Bee® A-7X7 is also approved for turbine engine degreasing prior to teardown.

Cee-Bee® C-105HF is an acid-activated, water-thin product designed to remove silicone sealants, resins, paints, and adhesives.

Cee-Bee® C-105NC is a thin, acid-activated product for removing silicone sealants, resins, paints, and adhesives.

Cee-Bee® A-477 is a non-methylene chloride, alkaline, diphase, hot tank paint and carbon remover.

Cee-Bee® A-951 is a product for removing corrosion inhibiting compounds and temporary coatings. Cee-Bee® A-951 also removes grease and shop soils.

Cee-Bee® A-952 is a solvent type remover for corrosion inhibiting compounds.

Cee-Bee® ALKO is a viscous, alkaline, water-based heavy-duty cleaner and corrosion and carbon remover. Cee-Bee® Alko is also effective in removing coked oils from turbine engine components.

Cee-Bee® A-292 is an alkaline-activated aircraft paint remover that rapidly and effectively strips a wide variety of coatings, including alkyd and modified alkyd enamels, nitrocellulose and acrylic lacquers, most moisture cured polyurethanes and many air-dried epoxies. Safe to use on all common aircraft structural metals.

Super Bee™ 300LF is a low foaming aqueous alkaline cleaner for immersion, spray wash, spray/rinse, steam injection, ultrasonic and pre/post NDT Cleaning Applications.

Super Bee™ 300LFG is a low-foaming liquid aqueous degreaser approved for immersion, spray wash, spray rinse, steam injection, ultrasonic, and pre/post NDT cleaning applications. It is safe on all common aircraft and turbine engine alloys when used as directed. Contains no nonyl-phenol ethoxylates (NPE).

Super Bee™ 262 Gel is a non-solvent, highly-concentrated gel specifically designed for degreasing turbine engines prior to tear down and for exterior aircraft cleaning.